Answer: When installing hard disk, jumpers should be set and make one of the disks as the maser disk and the other as standby. And it can not be hot inserted or pulled. If you need to replace the disk, you should shut down the machine.
Answer: Check whether the video signal of video server is normal or not.
Answer: a. Please check the utilization ratio of system CPU. If the average value is more than 60%, then it indicates that too much thread is opened for the system, and the CPU is overload.
b. Please check the network bandwidth.
Answer: Possiblecauses:
a. CCD camera is not power on or there is something wrong with video wire (or not well connected, loosened or broken),
b. Setting error of IP address and related channel number, or wrong protocol selection (at present do not support MCAST), please check "local setting",
Answer: Check HD Status, it should be normal, if not than try formatting it, still if problem not solved than, check whether the HD is Compatible With the DVR (Must be surveillance HD, check online for the list of compatible HD for DVR), if using the compatible HD than check for the Bad sectors in the HD inside Menu > Maintenance > HDD > Bad Sector Detection > select the HD no. > Click Test > if Red Area shown than the HD is facing some problem need to be replaced.
Answer: Go to Menu page through GUI > Configuration > Exception > Exception type > select All > Remove the teak [√] > Apply.
Answer: Check whether the DVR is connected on LAN Switch to which the computer is connected.
• Check the ping response for the DVR, must be continuous with average delay of 2ms.
• Check for IP conflict with the other devices connected in same network.
• Check the Computer IP address, must be in the range of the DVR IP, like if DVR IP is 192.168.0.2 than computer IP must be ranging from 192.168.0.3 – 192.168.0.254.
• Remove the tick [√] from enable DHCP option in menu > configuration > network > TCP/IP > disable DHCP > assign the local IP manually > Apply.
Not: For time scheduled recording remove the [√] from all day recording make the schedules, in all 8 schedules can be made for each day & for each schedule different record type can be selected, next follow the same procedure.
Answer: Visit the ping.eu website & check the ports status, if showing closed perform the following steps:
• Check the firewall settings (must be disabled).
• Check the UPNP settings (must be disabled mostly).
• Both Port forwarding & DMZ configuration done together (at a time either one can be used).
• Same ports configured inside Port forwarding table for two different application in the same network (hence try changing the ports).
• Many times ISP changes the ports from their end (on DTE Device), causing the Devices showing online earlier, to go offline (hence get in touch with the ISP to sort out this issue)
• Ports are closed from ISP end (making sure from ISP that the required ports are open from their end.
First check the computer's power cord to make sure it is completely plugged into the wall socket. If you are using a plug strip, make sure it is completely plugged into the wall socket and that the power switche on the plug strip is turned on. Some plug strips also have a built in circuit breaker which usually looks like a black or red button near the power switch. Press the button to reset it and see if that solves the problem.
What do I do when my computer crashes?There are many reasons why a computer may just stop working or "freeze". Most of the time there isn't much we can do about it, it is a fact of life that computer programs have become so complex that occasionally users will experience problems even when performing common tasks. When your computer no longer responds to keyboard commands your best bet is to re-boot the computer.
What do I do if my hard disk fails to work?As with most computer errors, your first step is to shut down your computer and restart it. This will help you confirm weather or not you actually have a hard disk problem. If the disk is severely damaged then your computer will probably fail to restart properly. If this is the case then contact MC Ware, this is a job for the professionals.
Make sure the monitor is on. If no power light (green or orange light) is seen on the monitor display try pressing the power button until it comes on. If your computer monitor was on and you stepped away from the computer and upon returning it was black it's likely that the computer is asleep. Try moving your mouse, clicking the mouse buttons, and/or pressing any key (space bar) on the keyboard to wake it up. Make sure that the monitor is connected properly to the back of the computer.
What do I do if the image on screen is distorted or skewed?You may receive a distorted image when the cable is loose or defective. Disconnect the video cable going from the back of the computer and verify that no pins are bent, burnt or broken. Once verified re-connect the monitor cable. If the refresh rate is not properly set the monitor may have a wavy or an appearance that lines are going down or across the monitor slowly or fast, this may also cause a flickering affect. A distorted image can be caused by magnetic or other types of interference. Verify no speakers, fans or other magnetic devices are close to the monitor.
I get a 'no signal input' message, what do I do?Verify that the monitor is properly connected in the back of the monitor as well as to the back of the computer. If the monitor appears to be connected properly, verify that a cable is not loose by disconnecting all cables that can be disconnected in the back of the monitor (generally the data cable cannot be disconnected). Next, disconnect the data cable connected to the back of the computer and then reconnect the cable. When connecting the cable in the back of the computer ensure the cable connection is tight. Most Computers will also have screw ends that can be screwed in to hold the connector in place.
There are black borders on my screen, what do I do?If the resolution was recently changed it is possible for the monitor to not auto adjust or shift to the correct size. If this occurs, the resolution can be changed back to the original setting or you can manually adjust the monitor. If a black border exists on the monitor it can generally be resolved by manually adjusting the horizontal or vertical width. Because each monitor is different, the method of adjusting this setting will vary; consult your monitor documentation.
Users who have an optical mechanical mouse (most common mouse for desktop computers) are likely experiencing erratic behaviour because the mouse is not clean or is dirty. If you've cleaned the mouse and continue to encounter issues and this mouse has worked in the past fine unfortunately your mouse is likely defective. One additional test that can be done to help determine if this is the case or not is to connect the mouse to another computer. Otherwise we suggest replacing the mouse.
The wheel on my mouse isn't working properly, what do I do?If you're running any version of Microsoft Windows and are encountering issues with the mouse wheel first attempt to adjust the mouse settings through the Mouse Properties window. This window can be accessed by opening the Control Panel and double-clicking the Mouse icon.
How can I clean my keyboard?The keys on a keyboard are only clipped on, with a knife or other thin object carefully pop the keys off, this will allow you to clean under the keys as well as cleaning the keys themselves.
To get into the Windows 2000 / XP Safe mode, as the computer is booting press and hold your "F8 Key" which should bring up the "Windows Advanced Options Menu". Use your arrow keys to move to "Safe Mode" and press your Enter key.
I can't delete a file because it is being used by Windows?Close all programs running on the computer and try again. If after closing all programs running on the computer you are still encountering the same issue when attempting to delete files, load the computer into Safe Mode and delete the files.
How can I update my Microsoft Windows computer?If you are running Microsoft Windows 98, Windows 98 SE, Windows ME, Windows 2000, Windows XP, or a later version of Microsoft Windows, you are eligible to update Microsoft Windows, and in some cases, your computer hardware with the latest drivers through Microsoft's update site, visit http://windowsupdate.microsoft.com.
Is it safe to turn off a Windows computer without doing a shut down?Users should not simply press the power button or restart the computer while Windows is still running unless there is an issue with the computer. Microsoft has included the shut down feature because it enables a computer to go through all the all the necessary steps that are required before turning off the computer. In fact many versions of Microsoft Windows will check the computer for any problems if the computer is not shut down properly.
How can I recover a file from the recycle bin?Double click the recycle bin icon on your desktop, here you will see all of the files within your bin. Select the files you wish to recover, right click and choose restore.
Verify that your computer is able to see the Internet and/or other computers to ensure that your computer is not encountering a connection issue, which would be causing your e-mail issue. Ensure that your Internet e-mail server or your Network e-mail server is not encountering issues by contacting either your Internet Service Provider or your Network administrator.
I can't receive any email attachments?If the e-mail box is full of other e-mail messages and/or your storage space is only a few megabytes it's possible that the attachment being sent cannot be received. Often if this problem is occurring the person sending the e-mail should get a response back from your e-mail server indicating that your mailbox is full and/or has exceeded its allocated size. Because computer viruses and other malware are best distributed through e-mail, many e-mail service providers, companies, and e-mail programs prevent certain types of file extensions from being distributed or received through e-mail. For example, Microsoft Outlook protect its users by automatically disabling certain file extension types from being received in e-mail.
Are spaces allowed in email addresses?Just like an Internet URL no spaces are allowed in an e-mail address. However, names can be broken up using a period; for example, John Smith may have an e-mail address: john.smith@computerhope.com or john.s@computerhope.com because no spaces are allowed in the e-mail address.
When printing on untraditional paper your printer may experience smudges, un-even or crooked text, and/or text that runs off the edges of the paper. Your printer may be printing fuzzy, blurry, and/or other faint text because of dirty print heads. All modern printers have some type of printer cleaning, self-test, and/or diagnose mode that can be performed to check and clean the printers print heads and other internal equipment used to print.
How do I fix a paper jam?Turn off the printer. Inspect the location or tray the printed paper ejects to. If the stuck paper is visible manually remove it. Remove all paper trays and any paper that may be stuck between the tray and the printer. If the stuck paper is visible manually remove it. Open the printer door that allows you access to the printer ink cartridges or toner and look for any stuck paper. If the stuck paper is visible manually remove it. Turn the printer back on.
I lost my printer installation disk, how can I install my printer?Thankfully a missing printer installation disk or disc is not the end of the world and will not require you to wait until a new diskette or CD can be sent to you. Today all printer and other hardware manufacturers are providing downloads on the Internet to their software programs and drivers that are included with their products.
Verify that the network cable is properly connected to the back of the computer. In addition, when checking the connection of the network cable, ensure that the LED's on the network are properly illuminated. For example, a network card with a solid green LED or light usually indicates that the card is either connected or receiving a signal. Note: generally, when the green light is flashing, this is an indication of data being sent or received.
How do I map a network drive?Open Microsoft Explorer. From Explorer, click the Tools drop down menu and click the option "Map Network Drive." Specify the network drive or network computer as the folder. If the computer's name was hope, to map to that computer, type \\hope If you wished to map to a shared folder on the hope computer such as a mp3 folder, you would type \\hope\mp3. If a different username or login is required to connect to this computer or drive it must be specified in this window before clicking the finish.
How do I determine my computer's name?Right-click My Computer. Click Properties. In the Properties window, click the Computer Name tab. Within this tab you'll be able to see the full computer name, workgroup and also a description. If you wish to change the name or workgroup, click the Change button.
A computer virus is a software program that has been intentionally created to cause a user grief, spread to other computers, or destroy data on an individual's computer. To help prevent a computer from becoming infected by a virus, software developers have developed anti virus programs that stay active on the computer helping to protect it. It is important to realize that many computers do not come pre-loaded with these already installed and that if computers do come with these programs, the programs may expire within 90 days.
Does Windows come with a virus protection program?All versions of Microsoft Windows do not come pre-installed with a virus protection program. This includes: Microsoft Windows 95, Windows 98, Windows ME, Windows NT, Windows 2000, Windows XP and Windows Vista.
Can a virus damage computer hardware?No. Computer viruses are software code designed to spread to computer files and other computers, delete files, and cause other problems with the data on the computer. So if you're experiencing an issue with a hardware device such as your printer, video card, sound card, etc. it is not due to a virus.
If I format or erase my hard drive will it remove a virus?If your computer is infected with a virus formatting or erasing the hard disk drive and starting over will almost always remove any type of virus. However, keep in mind if backups have been made that contain the virus, other media or drives connected to the computer have a virus, your computer is connected to another computer on a network with a virus, and/or the virus is stored on some other type of software you use with your computer it can become re-infected if not properly protected.
Microsoft Internet Explorer users can go to tools and then choose 'Delete browsing history..', you can then choose to delete your Internet cookies.
Simple! You place an order and mail us over a Company letterhead - credit account opened!
Yes! 30 days credit from the invoice date.
The next day - delivered by one of our wonderful drivers!
Yes! Please ask when you place your order and we will make arrangements.
Online, telephone or mail us - whichever you prefer!
Yes, if we are notified within 48 hours and the goods are still in the original packaging.
Cash, cheque, DD’s or Online NEFT/RTGS Payment - whichever is easiest for you!
Yes! We are always available to visit our customers
cPanel is server-management software that provides an interface to create, edit, backup and even move your website in your browser. It also enables you to create FTP users and email accounts, optimize your website for search engines, install software and track your Web hosting resource usage.
The basics of Web hosting remain the same regardless of what programs your hosts used in the past. While you might have to get used to the location of subdomains as directories or working in the "public_html" folder rather than the "WWW" folder, cPanel provides the same functions -- and many more -- that you're already used to. We're happy to answer any questions that you might have about working in cPanel if it's new to you.
While other control panel options exist, most web hosts use cPanel, which can make moving between hosts easier than you ever imagined. cPanel uses a friendly graphical user interface that is comfortable even for new website owners, and old pros will find everything they need to do is possible with cPanel. Customization options also set cPanel apart from the competition.
You can change your hosting control panel password, if you have the current password.
Linux with cPanel
cpanel change password
Answer: A simple answer is:
